Human Acid Phosphatase 2, Lysosomal (ACP2) ELISA Kit

DL-ACP2-Hu

1. Overview:

Other names:Lysosomal Acid Phosphatase

Function: N/A

Sequence:MAGKRSGWSR  AALLQLLLGV  NLVVMPPTRA  RSLRFVTLLY  RHGDRSPVKT

YPKDPYQEEE  WPQGFGQLTK  EGMLQHWELG  QALRQRYHGF  LNTSYHRQEV

YVRSTDFDRT  LMSAEANLAG  LFPPNGMQRF  NPNISWQPIP  VHTVPITEDR

LLKFPLGPCP  RYEQLQNETR  QTPEYQNESS  RNAQFLDMVA  NETGLTDLTL

ETVWNVYDTL  FCEQTHGLRL  PPWASPQTMQ  RLSRLKDFSF  RFLFGIYQQA

EKARLQGGVL  LAQIRKNLTL  MATTSQLPKL  LVYSAHDTTL  VALQMALDVY

NGEQAPYASC  HIFELYQEDS  GNFSVEMYFR  NESDKAPWPL  SLPGCPHRCP

LQDFLRLTEP  VVPKDWQQEC  QLASGPADTE  VIVALAVCGS  ILFLLIVLLL

TVLFRMQAQP  PGYRHVADGE  DHA

2. Features

INTENDED USE

The kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of ACP2 in human serum, plasma, tissue homogenates and other biological fluids.

DETECTION RANGE

0.781-50U/L. The standard curve concentrations used for the ELISA’s were 50U/L, 25U/L, 12.5U/L, 6.25U/L, 3.12U/L, 1.56U/L, 0.781U/L.

SENSITIVITY

The minimum detectable dose of ACP2 is typically less than 0.42U/L.

The sensitivity of this assay, or Lower Limit of Detection (LLD) was defined as the lowest protein concentration that could be differentiated from zero. It was determined by adding two standard deviations to the mean optical density value of twenty zero standard replicates and calculating the corresponding concentration.

SPECIFICITY

This assay has high sensitivity and excellent specificity for detection of ACP2.

No significant cross-reactivity or interference between ACP2 and analogues was observed.

Note: Limited by current skills and knowledge, it is impossible to perform all possible cross-reactivity detection tests between ACP2 and all analogues, therefore, cross reactivity may still exist.

IMPORTANT NOTES

1.Limited by the current conditions and scientific technology, it is impossible to conduct comprehensive identification and analysis tests on the raw materials provided by suppliers. As a result, it is possible there are some qualitative and/or technical risks.
2.The final experimental results will be closely related to the validity of the products, operation skills of the end users and the experimental environments. Please make sure that sufficient samples are available to obtain accurate results.
3.Kits from different batches may be a little different in detection range, sensitivity and color developing time. Please perform the experiment exactly according to the instruction manual included in your kit. Electronic ones on our website are for reference only.
4.Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied by manufacturer.
5.Protect all reagents from strong light during storage and incubation. All bottle caps of reagents should be closed tightly to prevent evaporation of liquids and contamination by microorganisms.
6.There may be a foggy substance in the wells when the plate is opened at the first time. It will not have any effect on the final assay results. Do not remove microtiter plate from the storage bag until needed.
7.Incorrect procedures during reagent preparation and loading, as well as incorrect parameter setting for the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10nm or less and an optical density range of 0-3 O.D. or greater at 450 ± 10nm wavelength is acceptable for use in absorbance measurement. Please read the instruction carefully and adjust the instrument prior to the experiment.
8.Even the same experimenter may get different results from two separate experiments. In order to get better reproducible results, the operation of every step in the assay should be controlled. Furthermore, a preliminary experiment before the general assay for each batch is recommended.
9.Each kit has undergone several rigorous quality control tests. However, results from end users might be inconsistent with our in-house data due to some unexpected transportation conditions or different lab equipment. Intra-assay variance among kits from different batches could arise from the above factors as well.
10.Kits from different manufacturers with the same item might produce different results, since we have not compared our products with other manufacturers.
11.The standard of the kit and immunogen used for antibody preparation are commonly recombinant proteins. Different expressed sequence, expression systems, purification methods might be used in recombinant protein preparation. Besides, there might exist differences on the screening technique of antibody and antibody pairs in our kit. Thus we can not guarantee the kit could detect recombinant protein from other companies. So, it is not recommended to use the kit for the detection of recombinant protein.
12.Validity period: 12 months.
13.The instruction manual also works with the 48T kit, but all reagents in the 48T kit are reduced by half.

PRECAUTION

The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this reagent.

You can reference link of the kit as following

http://www.dldevelop.com/Research-reagent/dl-acp2-hu.html

Send your message to us:

INQUIRY NOW
  • * CAPTCHA: Please select the Star


Post time: Apr-11-2018
WhatsApp Online Chat !